Weather

MARYVILLE, MO KE0SBX QTH
Showing posts with label QRP. Show all posts
Showing posts with label QRP. Show all posts

Wednesday, April 16, 2025

Yet ANOTHER Way to Convert from CB to 10 (CB to CW Part V)

Yep, another way. Just found it out today.

If you want a 10 meter radio that's channelized or if you don't want to try your hand at computer science, try this modification instead! The cost: Well below $10 or even $5. The candidate: A Midland 13-866 (or the 853 if it gets fixed).

Friday, April 11, 2025

Midland 13-857: An Unexpected Joy

 After the initial failure of the 13-853, I decided that I needed to send it off to a local CB shop for repair. In the meantime, I purchased 3 more 23-channel CBs for conversion - just in case :). One of them is a Midland 13-857 - the coolest CB radio I've ever owned.

Tuesday, February 18, 2025

CB to CW Part 4: Wireless UI

Let me ask you something...

What is the number one thing that you have with you at all times? A pencil? Earphones? How about your cellphone?

In today's post, I'm going to be simplifying my CW CB radio to take away the OLED and rotary encoder to provide you with an easier user interface accessible via a web browser. After this, you should have a roughly-speaking software defined radio!

Wednesday, February 12, 2025

I DID IT!!!

 I FINALLY DID IT!!! After 6 years of off and on practice, I now can say that CW is my new favorite mode.

Tuesday, November 26, 2024

My HUGE Pixie Project

 After the failure of the Paraset Pixie, I decided to give up for a bit on any Pixie-related projects. I was frustrated, and rightfully so. I more than likely got a dud but for as cheap as they run, there's not much of a loss there.

However, one does have to appreciate the simplicity of the Pixie circuit. You can spend hours and hours on research, but it all boils down to a simple direct conversion receiver paired with a simple CW transmitter. The work is placed on the final amplifier transistor, as this functions as the power amplifier in transmit, and acts as the mixer on receive. Clever, isn't it? You can see the idea here from the RU-QRP group:

Unfortunately, the Pixie is an abhorrent choice of QRP radio to use. It's crystal controlled, meaning that it lacks frequency agility. The choice of direct conversion on receive leaves the pass band wide open as a barn door, meaning that QSOs will be several kilohertz above and below your spot frequency. The variable potentiometer only helps up to a point. However, this doesn't mean that it is automatically destined for the trash bin. 

Thursday, November 21, 2024

Pixie Sixtie (Part III): Harmonic Suppression

 Today I'll discuss a filter that is imperative to have so I can use the Pixie on the air. I'll cover two types - a low-pass and a band-pass, and explain why you may want them on your project.

Wednesday, November 20, 2024

Pixie Sixite (Part II): The Passive Audio Filter

Today I want to discuss an imperative add-on for the Pixie Sixtie I'm building. This should also apply to any other Pixie kit or similar QRP kit with poor front-end filtering and a wide passband.

Wednesday, November 06, 2024

Pixie on Sixtie (Part I)

In the 6ish years I've been a ham I have not once touched or operated on 60 meters. It is the only HF band that is unexplored territory for me. That being said, 60 meters may be unappealing to many hams as it was for me. You're only limited to 5 channels with 2.8KHz of bandwidth, mode choices of SSB, narrow data modes such as PSK31 or CW, and a maximum power limit of 100 watts ERP. Not very appealing :|

Sunday, September 01, 2024

The PeaNOT: A 74HC04-based QRP Transmitter

As a computer scientist, we deal with several ICs that serve many purposes. Some are microcontrollers. Some are logic gates. Some are just...rather interesting. There's one IC in particular that has its uses as a minimalist oscillator or transmitter with at least 6 components: the 74HC04, the legendary CMOS inverter.

Tuesday, April 09, 2024

The Ten Minute Transmitter

 Decades ago, a ham by the name of Steve, G4RAW, conceptualized a CW transmitter in a magazine article capable of putting out up to 1 watt of RF power over the air. It was so barebones that even the newly-licensed amateur, with little to no experience, could throw it together, tune it up, and possibly make a QSO in a matter of minutes. No, not hours - minutes. 10 minutes to be exact. This rig is called the Ten Minute Transmitter.

Wednesday, October 11, 2023

The Many Wonders of QRP Circuits

 If you're like me, you like to build things and experiment with them - you constantly ask yourself, "how does this work?" QRP operation has brought me to that question many times, and today, I want to discuss a few QRP designs I happened to stumble upon. I'm sure you've also seen these circuits across the web. Today, I'd like to showcase some simple transceivers that you can build in a very short amount of time for almost nothing!

Sunday, January 29, 2023

A Great Day for Ham Radio

Yesterday couldn't have gone any better than it did - I made two SSB contacts using only 10W of power and a wet noodle!

The first station I called was a special station. K3S is based on the world's first nuclear-powered boat, the Savannah. Savannah is currently docked and decommissioned near Baltimore, Maryland, and is recognized as a National Historic Landmark. According to the K3S QRZ page, January 28th is a significant day:

"Radio Operator Jack Binns sent a CQD (former SOS) message from [the] RMS Republic on January 23, 1909, after Republic was rammed by the Italian liner SS Florida. Republic subsequently sank, but Binns' CQD and continuous wireless work [resulted in] a successful rescue of all aboard except two killed in the collision."

It took me 3 tries to get through to K3S. The station's operator was Ted and he gave me a much-improved signal rating of 5x3. He was coming in around 5x8 or so. It was really amazing to work this station due to the special occasion, but at the same time, I also was just scanning around the bands. K3S held a QSO with me on 21.3137.

Later, towards the end of the day, I called CQ on 15m again. As soon as I sent out my third CQ call, N1IIC came right back. Fortunately, he told me that I was extremely modulated, which means my mic gain was too much. It's not very nice to overmodulate, so I turned it down. I guess you really don't need that much mic gain even for 10W. He came in at a 5x5. N1IIC QSOed with me on 21.3680. We had a good talk, I told him where my QTH was at and that I had been hearing RTTY on every band I was on. January 28th was also when the British Isles were hosting a RTTY contest, which took over almost every band. It's so beautiful to hear so many RTTY stations.

In addition to this, I will be updating my station (again!) with another radio provided by HRO - the Yaesu FT-891. If you haven't heard the news already, Yaesu is discontinuing the FT-817/818 line of radios. This looks like a good replacement for the cost as you will get 100W out in a smaller package. 

Until then, stay tuned for a review!

Sunday, January 01, 2023

The Cub Lives!!!!!! (For Real, This Time)

 Yep, you read it right, the transceiver that I gave up on months and months ago sprang to life. I had a feeling that it wasn't dead, my heart of hearts told me that. 

So, what happened, and what did I learn? Here's the important thing: There's more than one way to do something. Ben Franklin once said, "I didn't fail the test, I just found 100 ways of doing it wrong," and that's what I did. 

With the help of various QRZ.com members, namely KL7KN, I figured out that the receiver can be adjusted with the probing of U2's Pin 1. U2 is an SA602 and is the filter mixer. Probing Pin 1 bypasses the filter circuit, which in essence creates another antenna. The antenna will generate a buzzing or hissing noise. From here, tune L1 and L2 for maximum noise. If you can't hear any stations when you bypass the filter, you still have a problem, unfortunately (once again, thanks A LOT KL7KN!).

I can't tell you how much joy I felt when I began to hear stations when I connected an antenna. It really made me happy when I could hear the FT8 frequency, which means that my tuning was dead on where I wanted it. I could also hear CW stations with ease.

By now, many of you are wondering how well this stacks up to the Pixie. I will tell you that it blows it out of the water completely. The Cub has a crystal filter, an onboard audio amplifier, a great tuning range, and about 2W of output power that can be varied if you want to work QRPp. While the Cub sounds impressive, there are some drawbacks to it. It needs to warm up for a couple of minutes before you transmit so the frequency is rock solid. I also found the alignment to be a bit cumbersome, but that may be because I haven't built a kit like this before. While the audio is acceptable, I feel that it could be a bit louder, but it definitely beats the Pixie's quiet and wide-open receiver any day. For the completed project, I took some photos.


I set the Cub aside and waited to touch up the transmitter side of things until the next day. Turns out, the transmitter side of things was not as complicated as I had thought. In a matter of under 30 minutes, I had a fully-functional Cub, with 1.5 watts of output on 20m. 

In addition to this, I built my own 50 ohm dummy load with a wattmeter output. That can be found here: https://www.qsl.net/kc6wdk/QRP/wattmeter.htm. Here is what mine looks like. I do want to note that my copper chloride etchant, used with a nail polish resist, works very well.

To close, this has been an exciting and fun adventure. Now I'm off to build a dipole antenna and perfect my Morse Code! My next test with this is to see if I can show up on the Reverse Beacon Network, or RBN. 

If you also want to use the RBN, it's easy! Just send the following in Morse Code:

CQ RBN CQ RBN DE [callsign] [callsign] K

CQ TEST CQ TEST CQ TEST DE [callsign] [callsign] [callsign] K

The RBN looks for CQ calls, so even if you just send out CQ, there is a good chance that you'll show up on the RBN. There are thousands of operators listening on thousands of frequencies and reporting daily. If you know how to send CQ and your callsign in Morse, you'll have no problem showing up on the RBN. It is popular with QRPers in particular since QRP can be a little unpredictable as to where you will reach. Having your callsign show up on the RBN site can give you a generalization of where you can be heard and what you can work.

That's all for now from my shack. Hope you have a great New Year! Until next time...

EDIT 1/2/2023 - Just a few moments ago, I sent out a quick CQ call on the Cub using my EFHW. As soon as I finished sending my callsign, I got a report from the East coast at a distance of 963 miles, which equates to around 647 miles per watt! Not bad, especially for 1.5 watts and a crappy end-fed antenna. I'm off to build my dipole now and brush up on my Morse skills...

Thursday, September 22, 2022

Crossing the Pond on 10W and a Prayer

We did it, I officially crossed the pond today! And I learned some valuable lessons along the way.

I came home from school to eat lunch and figured that I should operate on 15m for a while. Lately, 15m has been super active, so I figured I should throw out my callsign to see if someone came back. I heard a few people collecting callsigns, so I waited to send mine out until I was confident that's what they were doing. One station, in particular, was IK4GRO in Northern Italy. I'm not quite sure what he was running but I was getting 5x8 and 5x9 signals on my meter. 

After waiting a few minutes, I threw out my call. Nothing. I tried again, but still nothing. After a dozen or so tries of trying to break through the QRM and QRN, I got through. Unfortunately, he got my callsign wrong, but that's expected since I was QRP. Instead of KE0, he got KE1. I let it go for a while before throwing my call back out.

After 5 or 6 tries, I got through! I got a 4x4 report and I gave him a 5x8 report. Not bad for a contact I had been hoping for for a long time!

Of course, I learned a lot just from this single contact, and I'd like to share that with you...

1. Patience is everything!

It took me dozens of tries to get through to IK4GRO. It wasn't easy. Sometimes, you just have to persist until they hear you. A 4x4 report means that I could be heard with a little noise at an S4 or so on the meter. On QRP, you will have to try harder to make contacts.

It may take you 1 call or maybe 50 calls, but you will eventually get through. On other occasions, you might have to give up and move on. It's all part of the fun!

2. Get a good antenna

Okay, hams are all about amplification, but in theory, an antenna makes the difference. Amplifiers don't add much, maybe only half or up to 1 S-unit. That would've only gotten me to S5 - not much of a difference.

I ordered a tactical antenna from HRO which I plan on taking to the field. Speaking of the field, that's the next tip I learned.

3. Get out of the house!

Find a place where there are little to no buildings and obstructions. You'll want some trees to mount your antenna in. Try to find a place that is elevated, flat, or near water (water is a good reflector!). I have many places around where I live to go out and operate QRP. 

Here's the other perk - you get to go into the great outdoors and enjoy some nice weather! You might walk into one of your friends and start a conversation. I have found that the more I talk to my friends about it, the more interested they seem. Had I gotten out of the house today, I hypothetically think my signal report would've been better.

4. Time of day matters

My TS-660 is a daytime radio - that means that it will only work from a bit before sunrise to a bit before sunset. I'm gone during the day so I don't get much action unless I listen to stations on my shortwave receiver. For the past week, I have listened to 15m via my shortwave, and I have heard at least 100 stations over the past week or so. This was all done around 2 or 3pm in the afternoon. 

5. A decent microphone works best

Stock microphones aren't bad, but they're basic - a condenser and a PTT button. Higher-end microphones have everything from preamps to audio filters. It's not really necessary but it might help. I found myself cupping the mic constantly trying to get the best acoustics for my voice. 

I have several more lessons that this contact taught me, but these have got to be the most important ones. I also want to say thanks to IK4GRO for calling me back despite operating QRP and the QRM that we experienced. Although I got a 4x4 rating today, it's better than not getting a call at all. 

Many, if not all hams say that 10W SSB is impossible. Today, I did the impossible and defied the odds. I wonder if this is how Marconi felt when he made the first radio transmission...

Here's a Snapchat video clip of the signals I received from IK4GRO today on 21.332.8MHz:

Until next time, I'll see what else this great little rig can pull off!

Tuesday, September 13, 2022

Wednesday, September 07, 2022

At Long Last, The CUB!!! (And how to make a dipole for it!)

 At long last, I have you now, Cub! After 2 or 3 weeks of waiting for it, I'm hoping it will be worth the wait.

In the meantime, I looked over the PDF instructions to see what I was working with. I will need some alignment tools, and some might just be rudimentary. I did manage to find my NanoVNA in a drawer on my workbench, so this week has been good... up until I began running a low grade fever and felt like I was going to pass out at any given moment.

Not sure what happened, but you can all breathe - it was NOT Covid. My guess is that I got overheated at band practice or something else. I'm not quite sure what happened with me, but I'm feeling just a bit better.

Friday, August 26, 2022

An analysis of the 15, 12, and 10-meter bands

 Do you ever wonder if there's any ham that's not on 80, 40, or 20 meters? I sure do, especially since I mainly do my work on 15, 12, and 10 meters. I have the capability to do 6 but I don't have the tuner (hooked up, at least) yet to access this band. After about a year of on and off operating, here's my analysis of the only bands I can access at the moment. I'm capped at 10W, so this could affect my signal strength and what my experiences are. 

15 Meters

15 meters is the most busiest band by far that I've heard. It's mainly stateside or contacts in the Caribbean or South America. Most traffic is FT8 or Morse but I've heard the occasional RTTY or CW from W1AW. I've also heard the fellow operator many times in the house who goes by the name Kenmore. Up to this point, this is the only frequency band that I've made successful contacts on and they've only been on FT4 and FT8. 

I'd like to do more though. I have thrown out dozens of CQ calls on voice, RTTY, PSK31, and even Feld Hell, but to no avail. There are frequencies for these modes, but they're dead all the time. I have been spotted several times but no one comes back to me on these modes. It got me wondering if it could be my antenna setup, or maybe it's because my entire setup is inside. 

12 Meters

12 meters is a nice band and because it's a WARC band, it's a safe haven from contest pileups. Yes, there are data and voice segments. I rarely hear traffic on this band, but during contest season, it piles up fast with people who are non-contesters. I've mainly heard voice, the occasional CW, and FT8 on this band.

Although it's a small band it's still useable, but not for me. Unfortunately, my antenna tuner refuses to load my EFHW under a 2:1 SWR without compromising power. It's just impossible! Maybe an auto tuner or different antenna can solve the issue???

10 Meters

Many amateurs report that this band is littered with stray CB operators, but from what I can tell, this band is pretty dead. Except for FT8, which is still far and few between, there is nothing here where I'm at. It's kind of sad because Technicians have the capability of using the 10m band for SSB voice and most are excited to get this privilege on HF. Unfortunately, I've not heard a single voice on this band in the entire time that I've owned and operated this radio.

10 meters is also VERY susceptible to changing solar conditions, even more sensitive than the other HF bands. Perhaps the solar weather isn't the best right now?

What should you do?

Keep calling. When I ran FT8 the first time, I had to call 15 times before someone came back to my CQ call! Given my current rate, I'd be calling CQ forever before someone came back to me on voice or RTTY. Just because the band seems quiet doesn't mean it's dead - someone could be listening for a CQ call to answer, you just never know. There are plenty of skimmers on PSKReporter and RBN, but unfortunately they only look for CW and RTTY CQs. They claim to look for PSK31 but so far I haven't seen anyone spot my PSK calls.

You could also consider increasing your power but the magic in ham radio is doing more with less, at least I think so, so I'd strongly discourage amplifier use. In fact you're required to use the minimum power necessary to carry out a contact. If 10W can do it, use 10W. If you need 50, use 50. I'm looking at getting a Yaesu FT-891, but I think I'll wait until conditions (economic conditions, that is) improve. Better yet, you could update your antenna system. You'd be surprised how well an antenna improves your signal and station setup. I run an EFHW random wire throughout the top of my room. It tunes up well, but I'm sure a dipole would do me wonders. I could probably load easier it on 12 meters, too. For starters, placing my antenna system outside would definitely change things.

Although I think it's kind of cheating the system, ask another ham friend that lives a state over for a QSO and test how far you can go. Or you can try spotting yourself on an SDR. I've tried this and I've heard my own RTTY signals being sent, with the SDR station near Washington, D.C.. I'm sure I could hear myself sending FT8, but that's impossible to confirm.

If you're in town, consider moving to a less dense area like a park. My radio is large, but I'm sure I could take it anywhere and I'm sure it would fit on a picnic table with ease. Where I live, I have a university that I attend with lots of trees and open space - perfect for mounting a simple dipole and making some contacts!

Other things or "lurking variables" could hinder your station performance. Such things include RFI from appliances and power supplies (it's real, believe me. And yes, do yourself a favor and buy a linear or battery supply!!!), current weather and solar weather conditions, and so much more. As I've mentioned before, ham radio is one large and ongoing science experiment that we all take part in. 

I hope to make some contacts on other modes. FT8 is great but it's gotten a bit too boring for me. If you'd like, tune to the 15, 12, or 10m bands - you might just find me there!

Hope to hear you down the log!