Weather

MARYVILLE, MO KE0SBX QTH

Monday, August 29, 2022

Introducing the Hammo Can - portable ammunition for your rig!

 Do you go portable with amateur radio? Perhaps you have a favorite QRP rig like the Yaesu FT-817/818, or a 100W like the FT-891. What if you don't have access to AC mains? Your power supply becomes useless. What if you don't even have a power supply or you're on a budget? Are you sick of your noisy, awful switching power supply? Can you not afford a large and bulky linear PSU?

Well fear not, because I have the solution for you! What if I told you that for well under $100, you can build a portable, battery-powered power supply from an ammo can? Yes that's right - for under $100, you too can make an almost watertight battery pack that will last you in the field for hours! Did I mention that it comes with a USB port for your phone to charge too???

Friday, August 26, 2022

An analysis of the 15, 12, and 10-meter bands

 Do you ever wonder if there's any ham that's not on 80, 40, or 20 meters? I sure do, especially since I mainly do my work on 15, 12, and 10 meters. I have the capability to do 6 but I don't have the tuner (hooked up, at least) yet to access this band. After about a year of on and off operating, here's my analysis of the only bands I can access at the moment. I'm capped at 10W, so this could affect my signal strength and what my experiences are. 

15 Meters

15 meters is the most busiest band by far that I've heard. It's mainly stateside or contacts in the Caribbean or South America. Most traffic is FT8 or Morse but I've heard the occasional RTTY or CW from W1AW. I've also heard the fellow operator many times in the house who goes by the name Kenmore. Up to this point, this is the only frequency band that I've made successful contacts on and they've only been on FT4 and FT8. 

I'd like to do more though. I have thrown out dozens of CQ calls on voice, RTTY, PSK31, and even Feld Hell, but to no avail. There are frequencies for these modes, but they're dead all the time. I have been spotted several times but no one comes back to me on these modes. It got me wondering if it could be my antenna setup, or maybe it's because my entire setup is inside. 

12 Meters

12 meters is a nice band and because it's a WARC band, it's a safe haven from contest pileups. Yes, there are data and voice segments. I rarely hear traffic on this band, but during contest season, it piles up fast with people who are non-contesters. I've mainly heard voice, the occasional CW, and FT8 on this band.

Although it's a small band it's still useable, but not for me. Unfortunately, my antenna tuner refuses to load my EFHW under a 2:1 SWR without compromising power. It's just impossible! Maybe an auto tuner or different antenna can solve the issue???

10 Meters

Many amateurs report that this band is littered with stray CB operators, but from what I can tell, this band is pretty dead. Except for FT8, which is still far and few between, there is nothing here where I'm at. It's kind of sad because Technicians have the capability of using the 10m band for SSB voice and most are excited to get this privilege on HF. Unfortunately, I've not heard a single voice on this band in the entire time that I've owned and operated this radio.

10 meters is also VERY susceptible to changing solar conditions, even more sensitive than the other HF bands. Perhaps the solar weather isn't the best right now?

What should you do?

Keep calling. When I ran FT8 the first time, I had to call 15 times before someone came back to my CQ call! Given my current rate, I'd be calling CQ forever before someone came back to me on voice or RTTY. Just because the band seems quiet doesn't mean it's dead - someone could be listening for a CQ call to answer, you just never know. There are plenty of skimmers on PSKReporter and RBN, but unfortunately they only look for CW and RTTY CQs. They claim to look for PSK31 but so far I haven't seen anyone spot my PSK calls.

You could also consider increasing your power but the magic in ham radio is doing more with less, at least I think so, so I'd strongly discourage amplifier use. In fact you're required to use the minimum power necessary to carry out a contact. If 10W can do it, use 10W. If you need 50, use 50. I'm looking at getting a Yaesu FT-891, but I think I'll wait until conditions (economic conditions, that is) improve. Better yet, you could update your antenna system. You'd be surprised how well an antenna improves your signal and station setup. I run an EFHW random wire throughout the top of my room. It tunes up well, but I'm sure a dipole would do me wonders. I could probably load easier it on 12 meters, too. For starters, placing my antenna system outside would definitely change things.

Although I think it's kind of cheating the system, ask another ham friend that lives a state over for a QSO and test how far you can go. Or you can try spotting yourself on an SDR. I've tried this and I've heard my own RTTY signals being sent, with the SDR station near Washington, D.C.. I'm sure I could hear myself sending FT8, but that's impossible to confirm.

If you're in town, consider moving to a less dense area like a park. My radio is large, but I'm sure I could take it anywhere and I'm sure it would fit on a picnic table with ease. Where I live, I have a university that I attend with lots of trees and open space - perfect for mounting a simple dipole and making some contacts!

Other things or "lurking variables" could hinder your station performance. Such things include RFI from appliances and power supplies (it's real, believe me. And yes, do yourself a favor and buy a linear or battery supply!!!), current weather and solar weather conditions, and so much more. As I've mentioned before, ham radio is one large and ongoing science experiment that we all take part in. 

I hope to make some contacts on other modes. FT8 is great but it's gotten a bit too boring for me. If you'd like, tune to the 15, 12, or 10m bands - you might just find me there!

Hope to hear you down the log! 

Wednesday, August 24, 2022

An update on my Station Overhaul as of 8-24-2022

Slowly but surely, my packages from Ham Radio Outlet have been arriving to my doorstep. So far, I have to say I'm impressed with my products.

Tuesday, August 16, 2022

MFJ Cub: Prospective QRP Project

Well, it's been a while, hasn't it? I guess I'd better start posting again about my latest adventures...

Recently, I've been considering doing one of many projects. I had the option to build my own travel trailer, give a complete makeover to my car, or pursue my hobby of amateur radio further. All the pursuits above have one thing in common: cost.

With that in mind, I settled to invest in my hobby. 

Friday, April 08, 2022

How to Make Your Own PCBs

     PCB making has been around for a while. It's a neat and tidy alternative to the messy deadbug or Manhattan-style construction. You can find PCB designs online or you can create your own. 

    To begin, you'll need the following:

  • A LaserJet printer and glossy photo paper - This is mandatory since an Inkjet printer will NOT work. LaserJet printers print in a special way that gives the best results. You can also use paper called Press-n-Peel paper that is specifically manufactured to create PCBs from laser printers.
  • PCB board (FR4) - I recommend you get the single-sided type. These can be bought from Amazon. Double sided boards work if you're needing a 2-layer PCB, but keep in mind this will be a bit more difficult to work with.
  • Iron - The heat from an iron will transfer the image to the PCB board
  • Sharpie - Needed to cover any parts that weren't covered by the ironing process
  • Acid etchant - This is where things get interesting, see a more in-depth description below
  • Drill bits - Can be bought from suppliers like Amazon. You'll need them small enough to drill holes for lead wires
That's practically it! Now to begin...

  • Design your PCB board - There are so many choices when it comes to software. You can use KiCad, EasyEDA, or any other PCB fabrication software. 
  • Prepare the board for etching - You'll need some steel wool for this step. This requires you to remove the oxidized layer of the FR4 board. Scrape it off until the copper is shiny and golden-looking. This is a crucial step in the process because it helps the stencil stick to it. Once you're finished, clean the surface with rubbing alcohol.
  • Print off your design - MAKE SURE you are using a LaserJet printer. Inkjets, as mentioned before, will NOT work because they use a different printing process. Use the highest toner setting to ensure a maximum amount of plastic flows onto the paper.
  • Place design - Place the image on the piece of copper board. Tape it down tightly.
  • Iron - Place your iron setting between 125C and 142C, or medium heat. It may take a little while for this step. Put the iron on the image and GENTLY rub the iron over it. 
  • Cool - Immediately place the board in a cooling pool of water or stick it in the freezer for about 2-3 minutes. Once it has cooled, remove the paper. The traces should now be "printed" onto the board. If you are missing any traces, use a Sharpie to retrace these lines
  • Etch - This is the important part of the process. Below, I'll explain what you can use as an agent
    • Ferric Chloride - This is by far the most popular choice among DIYers. It is a dark brown liquid, but be advised that FeCl3 is not something to be poured down the drain. IT WILL STRIP YOUR PIPES!!! Consult your local disposal agency for more information
    • Cuprous (Copper) Chloride - This can be easily made by buying products at your local hardware or general store. You'll need some hydrochloric/muriatic acid and some hydrogen peroxide. Mix 2 parts H2O2 to 1 part HCl. To prevent an extremely dangerous exothermic reaction, "do like you oughtta and add acid to water!" Pour the HCl into the H2O2 slowly and carefully. When you add the copper board in, it releases copper molecules and adds to the solution. The best part about this is you can use this as many times as you want.
  • Clean and Drill - Once the copper has been eaten away, remove the board from the solution bath. Clean it off immediately using acetone, available at many stores. If all has went well, the traces underneath the printed image should remain copper. Use PCB or small-size drill bits to create lead holes in the board. Of course, if you're using SMD components, this step won't be needed
  • Solder in the parts and you're all done!
    PCB making can be done at home easily, quickly, and cost-effectively. Home PCB fabrication can be useful if you need boards done faster in a short amount of time.

    Now, on to building the Michigan Mighty Mite...