Okay, so maybe my base rig needed an update too. I get it; there are not enough options for someone on a budget like me, and unfortunately, ham radio isn't a budget hobby. Don't get me wrong, I LOVE my TS-660, but there's just something about not having 80, 40, or 20m access that makes hams grumble when you're trying to set up a sked or a QSO. Building QRP equipment is great, but 9 times out of 10 you'll be limited to CW-only designs (in addition to Feld Hell, too!). Most hams don't do CW or even Feld Hell, so you're left calling CQ for ages if you use those modes.
In 2016, a miracle happened. Yaesu unveiled a new radio capable of producing 100W out on SSB, CW, and FM (and 40W on AM, if you care!). The best thing about this rig was its size - anyone could take it anywhere, no matter the circumstances, and even if you had a bare minimum wage-paying job, HF would be within reach. Thus, the FT-891 was born. Styled like its predecessors, the FT-817/818, it packed more punch than any mobile rig of the same size could. And if you're worried about being badged "Made in China," don't worry - it's actually made and imported from Japan, where electronics of quality are born.
I remember when I got licensed in 2018, just 2 years after the reveal. I can vaguely remember me trying to save money for a bigger and badder radio than any other ham out there. Unfortunately, it didn't happen, but I did get my TS-660 and prior to that, I was given a SK's Yaesu FT-2200, one of the best 2m radios I've owned. There is no comparison between it and the Baofeng. Period.
Background on the Purchase
For a little under $700, I went ahead and took the plunge and bought the FT-891. Before I bought it I read through the reviews and every website gave it 4.8/5 stars. The number one complaint (minimal complaint) was the controls - the radio has a lot of menus to go through but I don't think I'll find it a problem.
I ordered from Ham Radio Outlet again since I have had nothing but excellent service. The MSRP was $639.95 without tax - even with tax, it still didn't break the bank like I thought it would. The package arrived within two days, which is REALLY fast although it came from the HRO store in Milwaukee.
Initial Thoughts and Unboxing!
I went ahead and unboxed the radio which I must say was packaged pretty well! In the box, I got the radio, the faceplate, the microphone, the power cables, and some hardware for mobile mounting. I did have to resurrect my Pyramid 30A PSU, which actually wasn't too bad for the little rig! The moment I turned it on, I noticed little to no switching noise - obviously this has a built-in PSU filter.
I actually didn't mind having to step through the menus, and after enough practice, I think I know my way around this radio already! Unfortunately, I did run into some problems.
The FT-891 does not have a built-in sound processor like some of the higher-model radios, but it does have CAT control. I also realized that in order to use my LDG auto-tuner, I needed a special 3.5mm plug - oops. But in all reality, I don't mind. I still have my Easy Digi board and I can choose to control the rig via CAT or an RS232 breakout board. Looks like a custom interface is in the works for the future!
I tried using the SignaLink, but to my dismay, it only transmitted audio - it did not have any sound going to the computer. Yaesu did put a data interface on the back of the radio. It is a 6-pin, mini-DIN connector, like what you'd find on old computer mice or keyboards. If you have any old ones laying around, consider scrapping the cable - it should work! Below is the pinout:
Facing the back of the radio, the only pins we need to focus on are the DATA Out (Audio TO Radio), PTT (or if using the built-in CAT, ignore this!), DATA In (Audio FROM Radio), and GND (Ground). While I won't go into detail, KM4NMP has an excellent write-up on making your own interface, minus the PTT/CAT control. Just plug in the radio via the USB port in the back, configure your software, and go! Make sure to also adjust ALC levels so you're not overdriving the radio!
Closing Thoughts and Recommendations
I absolutely love this radio and to be unbiased and honest, I have no critical complaints. I think that this radio would be an excellent starter radio. It can also be used as a base station or you can go portable, much like its predecessors, the 817, 818, 857, etc. With 100W of output, you are more than guaranteed to work the world wherever you are.
I would certainly recommend this radio to someone who's on a budget. It's a good radio whether you're new to the hobby or an operator who's seen some action. If QRP just isn't cutting it for you or you're constrained to only 2 or 3 bands, consider getting this radio. With some extra circuitry, this radio can run FT8, PSK31, Feld Hell, RTTY, etc. On the flip side, if you do enjoy QRPing, this radio can lower power levels down to 5 watts.
Conclusion and updates
For the record, I STILL cannot get RBN spots in the south despite putting out significantly more power. I'm trying to get to Alabama, but no cigar. I am clear from coast to coast, but it appears that no one down there reports me or can't hear me. It may be time for a new antenna setup, particularly one that points south. Better yet, I NEED MORE SPACE! Do you know how horrible it is to have your entire station antenna set up on less than a tenth of an acre, let alone indoors???
The weather up here in Maryville is starting to get warmer (hopefully it continues to!), and today the temp is about 52 degrees. I'm starting to get back into the swing of things at school and summer can't come soon enough!
Once I get an extended break (in about 4 weeks or so), I plan on taking my radio out to the university and will hopefully make some contacts. Until then, I'm bound to the books for now...
